Table 3. Water and gas information of PCS cores at Sites 994, 995, 996, and 997.
Core | Core volume (cm3)** | Porosity (%)*** | Pore water mass (kg)§ |
Total water mass (kg)**** |
Total CH4 amount (mol)***** | Pore
CH4 conc. (mol/kg)§§ |
Total
CH4 conc. (mol/kg) |
---|---|---|---|---|---|---|---|
164-994C- |
|||||||
70P |
277 |
58 |
0.17 |
4.00 |
0.03 |
0.15 |
0.01 |
164-995A- |
|||||||
0P* |
0 |
0 |
0.00 |
4.12 |
0.00 |
-- |
0.00 |
18P |
970 |
64 |
0.64 |
3.76 |
0.02 |
0.03 |
0.01 |
27P |
1385 |
60 |
0.86 |
3.55 |
0.17 |
0.20 |
0.05 |
36P |
1039 |
57 |
0.61 |
3.66 |
0.06 |
0.09 |
0.02 |
45P |
804 |
56 |
0.46 |
3.76 |
0.18 |
0.38 |
0.05 |
48P |
319 |
54 |
0.18 |
3.97 |
0.03 |
0.18 |
0.01 |
52P* |
0 |
0 |
0.00 |
4.12 |
0.00 |
-- |
0.00 |
52P |
249 |
55 |
0.14 |
4.00 |
0.10 |
0.69 |
0.02 |
60P |
125 |
55 |
0.07 |
4.06 |
0.05 |
0.74 |
0.01 |
70P |
42 |
54 |
0.02 |
4.10 |
0.01 |
0.38 |
0.00 |
164-995B- |
|||||||
7P |
1288 |
57 |
0.76 |
3.55 |
0.10 |
0.13 |
0.03 |
10P |
901 |
56 |
0.52 |
3.71 |
0.04 |
0.07 |
0.01 |
164-996A- |
|||||||
7P |
277 |
55 |
0.16 |
3.99 |
0.22 |
1.43 |
0.06 |
164-996D- |
|||||||
7P |
0 |
0 |
0.00 |
4.12 |
0.34 |
-- |
0.08 |
164-996E- |
|||||||
8P |
0 |
0 |
0.00 |
4.12 |
0.02 |
-- |
0.00 |
164-997A- |
|||||||
18P |
582 |
63 |
0.38 |
3.90 |
0.01 |
0.03 |
0.00 |
25P |
1219 |
61 |
0.77 |
3.63 |
0.31 |
0.41 |
0.09 |
33P |
0 |
0 |
0.00 |
4.12 |
0.01 |
-- |
0.00 |
49P |
887 |
55 |
0.50 |
3.71 |
0.29 |
0.58 |
0.08 |
55P |
693 |
56 |
0.40 |
3.81 |
0.26 |
0.66 |
0.07 |
164-997B- |
|||||||
10P |
194 |
56 |
0.11 |
4.03 |
0.21 |
1.89 |
0.05 |
15P |
416 |
58 |
0.25 |
3.94 |
0.13 |
0.54 |
0.03 |
21P |
1302 |
52 |
0.70 |
3.48 |
0.14 |
0.20 |
0.04 |
29P* |
0 |
0 |
0.00 |
4.12 |
0 |
-- |
0.00 |
32P |
0 |
0 |
0.00 |
4.12 |
0 |
-- |
0.00 |
36P |
0 |
0 |
0.00 |
4.12 |
0 |
-- |
0.00 |
40P |
0 |
0 |
0.00 |
4.12 |
0 |
-- |
0.00 |
44P |
0 |
0 |
0.00 |
4.12 |
0 |
-- |
0.00 |
Notes: ** = (core length × pi × 2.1 cm2). *** = average porosity from Paull, Matsumoto, Wallace, et al. (1996). § = (pore volume × density of seawater). **** = [total mass = borehole volume (4 L) - sediment volume x density of seawater], where sediment volume = (core volume - pore volume); ***** = ideal gas law at 15°C and 1 atm, with volumes as in Table 2. §§ = assumes all methane from sediment core. Boldface values are from samples that should have hydrate at 0°C, although not necessarily at in situ conditions. -- = not calculated. * = runs where the PCS was configured to collect a water sample only, no core was taken.