Table 9. Geochemical analyses (wt%) of basalts from Sites 1026 and 1027. Hole: 1026B 1026B 1026C 1026C 1027B 1027B 1027C 1027C 1027C 1027C 1027C 1027C 1027C 1027C 1027C Core: 1R-1 4R-1 16R-1 17R-1 60X-CC 61X-CC 1R-1 1R-2 1R-6 3R-2 4R-1 4R-2 5R-2 5R-4 5R-5 Interval (cm): 29-33 35-44 40-45 31-38 34-39 22-25 38-42 35-42 55-62 119-121 131-136 9-15 51-55 68-71 121-124 Piece: 7 7 10 8 NA NA 1B 1A 2 NA 20 2 2 5 11 Depth (mbsf): 256.29 277.35 229.3 238.81 568.9 568.52 585.18 586.28 591.45 606.29 615.01 615.29 625.16 628.03 629.94 Lithology: A A A A A A D D D M M M M S S Alteration (%): 10 16 9 17 12 9 ** 20 11 8.6 ** 4.6 ** 5 6 9 11 4 SiO2 51.08 51.79 51.12 51.09 51.31 51.43 51.27 50.09 50.49 50.36 50.72 50.74 50.71 51.03 50.95 TiO2 1.85 1.69 1.64 1.62 1.42 1.48 1.39 1.32 1.36 1.76 1.65 1.65 1.08 1.12 1.09 Al2O3 14.08 14.85 14.69 14.34 17.16 18.13 16.34 16.05 16.53 14.87 13.84 13.75 14.77 15.01 15.29 Fe2O3* 12.26 10.48 10.93 10.16 8.46 7.54 8.75 9.03 8.58 11.41 12.06 12.02 10.39 10.24 10.59 MnO 0.22 0.18 0.23 0.17 0.27 0.29 0.12 0.15 0.24 0.22 0.19 0.19 0.17 0.19 0.16 MgO 7.17 7.47 7.81 8 6.23 6.26 7.08 8.89 7.29 7.25 7.38 7.47 8.43 8.42 8.18 CaO 11.41 11.62 11.77 11.82 12.53 11.98 12.09 12.12 12.46 11.94 11.68 11.84 12.96 13.22 12.93 Na2O 2.6 2.73 2.89 2.84 3.05 3.27 2.98 2.89 3.12 2.8 2.57 2.68 2.04 2.06 2.08 KO2 0.27 0.31 0.3 0.17 0.07 0.11 0.17 0.15 0.18 0.15 0.08 0.07 0.21 0.05 0.17 P2O5 0.17 0.15 0.14 0.13 0.16 0.19 0.16 0.15 0.16 0.15 0.14 0.14 0.09 0.09 0.09 Total 101.11 101.27 101.52 100.34 100.65 100.68 100.35 100.84 100.41 100.91 100.3 100.55 100.86 101.43 101.52 LOI 0.46 0.93 0.53 0.6 1.27 1.82 1.36 1.62 1.96 0.99 0.53 0.46 0.99 1.16 1.03 H2O 0.96 0.9 ND ND 1.27 1.29 1.55 1.16 1.61 1.03 0.83 0.95 1.11 1.26 0.75 CO2 0.94 0.81 ND ND 0.48 1.94 0.15 0.22 0.8 0.16 1.13 0.06 0.33 0.17 1.09 S 0.01 0 ND ND 0 0 0.03 0.02 0.01 0 0.03 0.06 0 0 0 Mg# 56.29 61.06 61.14 63.42 61.84 64.63 64.07 68.43 65.17 58.31 57.38 57.75 64.12 64.41 62.96 K/Ti 0.2 0.26 0.26 0.14 0.07 0.1 0.17 0.16 0.18 0.12 0.06 0.06 0.27 0.06 0.21 K/P 2.97 4.01 4.22 2.5 0.9 1.1 2.05 1.92 2.17 2 1.04 0.94 4.44 1.04 3.48 "Note: Rock types: A = aphyric basalt, S = sparsely phyric basalt, M = moderately phyric basalt; and D = diabase. NA = not applicable. ** = percent of alteration was determined from an adjacent piece. Fe2O3* is the" "total amount of iron expressed as Fe2O3. Mg# = 100xMg/(Mg+Fe2+), where Fe2+ = 0.9 x Fe total. LOI = loss on ignition. ND = not determined."