Press to Close

Table T4. Compilation of RMSE percentages for the carbonate prediction equations at each site/unit applied to each calibration data set, Leg 172.
 
Equation/
Data set
Unit I
Subunit IA All
Unit I
All
Unit II
All
Unit III
All
data
1054 1055 1056 1057 1058 1059 1060 1061 1062 1063

1054

5.47

9.38

8.87

10.50

11.00

13.00

13.40

14.60

13.50



14.70

9.93

8.44

9.41

9.85

1055

6.76

3.99

4.03

6.88

8.64

10.20

12.10

13.70

9.12



12.60

7.33

7.15

7.07

7.34

1056

8.73

5.54

5.31

7.62

10.00

9.89

10.20

11.00

10.90



12.40

8.38

7.76

8.05

8.24

1057

8.30

7.50

6.80

4.70

7.25

5.59

6.11

6.22

8.30



6.90

5.28

6.53

8.09

5.27

1058

8.82

8.79

8.41

6.75

6.06

6.78

6.93

7.25

8.11



8.97

6.72

7.76

7.48

6.73

1059

8.57

7.74

7.63

6.54

6.97

6.22

6.68

6.92

7.55



7.85

6.59

8.13

7.46

6.63

1060

6.77

5.82

5.66

5.32

6.97

4.43

4.26

4.45

6.05



8.61

5.18

5.93

7.84

5.21

1061

7.71

7.55

7.21

4.79

6.71

4.96

4.61

4.31

6.44



7.20

4.89

5.80

6.47

4.91

1062

10.30

10.20

9.80

7.06

11.70

7.38

7.64

7.97

6.27



6.58

7.31

8.46

11.80

7.35

1063

10.60

10.60

10.20

6.27

14.10

6.97

7.31

7.20

6.82



5.25

7.09

7.76

13.28

7.15

All Unit I

10.50

9.72

9.32

7.43

10.90

7.78

8.71

9.55

10.10



9.08

7.09

9.31

10.52

7.10

All Unit II

8.82

9.51

9.02

7.13

9.71

9.19

10.80

11.90

10.90



10.90

7.72

6.61

9.02

7.69

All Unit III

8.23

8.34

8.15

8.20

8.83

8.78

9.24

9.49

11.20



12.50

7.89

7.82

6.24

7.82

All data

10.36

9.61

9.20

7.81

10.90

7.80

8.83

9.88

10.40



9.26

7.08

9.21

10.35

7.07

Notes: RMSE = root-mean-square error. Prediction equations (rows) are named after the site or lithostratigraphic unit for which they were developed. Calibration data sets (columns) also correspond to the site or lithostratigraphic unit from which they were measured.

Press to Close