Table 9. List of splice tie points used to create the continuous "spliced" stratigraphic sequence for Site 1082.
Hole, core, section,
interval (cm)
Depth
(mbsf)
Composite depth
(mcd)
Whether
tied
Hole, core, section,
interval (cm)
Depth
(mbsf)
Composite depth
(mcd)
Offset
(m)
1082A-1H-5, 90 6.90 6.90 Tie to 1082B-2H-2, 93 6.14 6.90 0.76
1082B-2H-6, 36 11.56 12.32 Tie to 1082A-2H-3, 32.5 11.13 12.32 1.19
1082A-2H-5, 120 14.80 15.99 Tie to 1082B-3H-2, 31.5 15.03 15.99 0.96
1082B-3H-6, 108 21.78 22.74 Tie to 1082A-3H-3, 26.5 20.37 22.74 2.37
1082A-3H-7, 78 26.48 28.85 Tie to 1082B-4H-3, 61 26.32 28.85 2.53
1082B-4H-5, 32 29.02 31.55 Tie to 1082A-4H-2, 70.5 28.91 31.55 2.64
1082A-4H-7, 4 35.24 37.88 Tie to 1082B-5H-2, 55.5 34.27 37.88 3.61
1082B-5H-5, 56 38.76 42.37 Tie to 1082A-5H-2, 92.5 38.63 42.37 3.74
1082A-5H-7, 8 44.78 48.52 Tie to 1082B-6H-2, 84 44.04 48.52 4.48
1082B-6H-6, 96 50.16 54.64 Tie to 1082A-6H-3, 102.5 49.63 54.64 5.01
1082A-6H-5, 120 52.60 57.61 Tie to 1082B-7H-1, 35.5 51.57 57.61 6.04
1082B-7H-5, 100 58.20 64.24 Tie to 1082A-7H-3, 2.5 58.33 64.24 5.91
1082A-7H-7, 30 64.60 70.51 Tie to 1082B-8H-2, 42.5 62.63 70.51 7.88
1082B-8H-4, 12 65.32 73.20 Tie to 1082A-8H-3, 24.5 66.76 73.20 6.44
1082A-8H-8, 4 74.05 80.49 Tie to 1082B-9H-1, 52 70.72 80.49 9.77
1082B-9H-3, 48 73.68 83.45 Tie to 1082A-9H-1, 52 74.82 83.45 8.63
1082A-9H-7, 36 83.46 92.09 Tie to 1082B-10H-2, 31.5 81.53 92.09 10.56
1082B-10H-5, 24 85.94 96.50 Tie to 1082A-10H-3, 114.5 86.89 96.50 9.61
1082A-10H-8, 12 93.16 102.77 Tie to 1082B-11H-1, 90.5 90.11 102.77 12.66
1082B-11H-4, 28 93.98 106.64 Tie to 1082A-11H-1, 118.5 94.49 106.64 12.15
1082A-11H-6, 92 101.57 113.72 Tie to 1082B-12H-1, 22.5 98.93 113.72 14.79
1082B-12H-6, 4 106.24 121.03 Tie to 1082A-12H-4, 72 106.56 121.03 14.47
1082A-12H-7, 92 111.11 125.58 Tie to 1082C-13H-4, 92 108.42 125.58 17.16
1082C-13H-5, 60 109.60 126.76 Tie to 1082B-13H-2, 94.5 110.65 126.76 16.11
1082B-13H-7, 28 117.48 133.59 Tie to 1082C-14H-2, 120 115.20 133.59 18.39
1082C-14H-7, 84 122.34 140.73




Note: The tie points are listed in standard ODP meters below seafloor (mbsf) and meters composite depth (mcd).