Table T1. Offsets of cores, Holes 1095A, 1095B, and 1095D.
Core
|
Top
depth (mbsf) |
Offset
(m) |
Top
depth (mcd) |
|---|---|---|---|
| 178-1095A- | |||
| 1H | 0 | 0 | 0 |
| 2H | 5.9 | -1.06 | 4.84 |
| 3H | 11.3 | -1.2 | 10.1 |
| 4H | 20.8 | 0.1 | 20.9 |
| 5H | 30.3 | -3.46 | 26.84 |
| 6H | 39.8 | -3.96 | 35.84 |
| 7H | 49.3 | -3.96 | 45.34 |
| 8H | 58.8 | -3.96 | 54.84 |
| 9H | 68.3 | -2.42 | 65.88 |
| 10H | 77.8 | -1.54 | 76.26 |
| 178-1095B- | |||
| 1H | 83 | -4.14 | 78.86 |
| 2H | 92.5 | -5.5 | 87 |
| 178-1095D- | |||
| 1H | 0 | 0 | 0 |
| 2H | 8.6 | -3.1 | 5.5 |
| 3H | 18.1 | -1.92 | 16.18 |
| 4H | 27.6 | -3.7 | 23.9 |
| 5H | 37.1 | -5.24 | 31.86 |
| 6H | 46.6 | -4.76 | 41.84 |
| 7H | 56.1 | -3.8 | 52.3 |
| 8H | 65.6 | -3.42 | 62.18 |
| 9H | 75.1 | -4.3 | 70.8 |
Note: This table is also available in ASCII format.