Figure F1. Smoothed (11-point running average)/correlated MS data and the splice for the three holes at Site 1143 (spliced MS data for this figure are also available in ASCII format). The order of the four arrays (the splice and Holes 1143A through 1143C) increases outward from the origin. The hole arrays are offset from each other—and from the splice—by a constant (10.0 × 10^-5 SI units) so that only the splice is plotted relative to the MS value. Data from the top and bottom 7 cm of the first and last section of each core have been culled. Lines identify the splice tie points.