Figure F3. Gamma-ray attenuation data (GRA bulk density) and the splice for the three holes at Site 1144 (spliced GRA data in this figure are also available in ASCII format). The order of the four arrays (the splice and Holes 1144A through 1144C) increases outward from the origin. The hole arrays are offset from each otheróand from the spliceóby a constant (0.15 g/cm3) so that only the splice is plotted relative to the absolute GRA value. Values 1.03 and 2.4 (g/cm3) have been culled. Lines identify the splice tie points.