Figure F5. Detailed summary of Site 1170 biozonation, lithostratigraphic units, and physical properties for intervals of (A) 0-200 mbsf, (B) 200-400 mbsf, (C) 400-600 mbsf, and (D) 600-779.8 mbsf. Drilling disturbance ratings for the relatively soft sediments of Hole 1170A (A, B) consist of F0 (undisturbed sediments with only minor "edge effect"), F1 (bowing upward of up to approximately one-third core width [~2.2 cm vertical stretching] or 30° inclination of sediments), F2 (extreme bowing upward of approximately one-third to one-half core width [~2.2-3.4 cm vertical stretching] or 30°-60° inclination), F3 (onset of minor flow-in beyond that of F2), and F4 (massive flow-in). Drilling disturbance ratings for Hole 1170D (C, D) consist of B0 (>98%), B1 (97%-91%), B2 (90%-85%), B3 (84%-70%), and B4 (<70%). The minimum estimated percentage observed for Hole 1170D was ~50%. Physical properties data should be considered suspect for F3 and B3 and not considered robust for F4 and B4 categories. TD = total depth.