Initial Reports Volume 190 Chapter 6, Table 7. Structural data, Hole 1175A. Notes: cr az. = azimuth of plane in core reference frame, cr dip = dip of plane in core reference frame, cr line = azimuth of line in core reference frame, cr l.plunge = plunge of line in core reference frame, cr sense = sense of movement in core reference frame, pm az. = azimuth of plane in paleomagnetic reference frame, pm plunge = plunge of plane in paleomagnetic reference frame, pm line = azimuth of line in paleomagnetic reference frame, pm l.plunge = plunge of line in paleomagnetic reference frame, pm. decl.= paleomagnetic declination, pm. inc = paleomagnetic inclination (only, or nothing). Core, section, interval (cm) Depth (mbsf) Cr az. (degree) Cr dip (degree) Cr line Cr l.plunge Pm az. Pm plunge Pm line Pm l.plunge Identifier Notes 190-1175A- 1H-3, 94-101 3.94 160 32 Bed 2H-4, 58-59 12.28 Fold S-fold in archive half, 1-cm wavelength 3H-1, 43-47 17.13 166 51 288 51 Bed 3H-1, 51-52 17.21 115 16 237 16 Bed 3H-1, 87-94 17.57 342 51 104 51 Fold axial plane Z-fold in archive half, 6-cm amplitude 3H-2, 92-98 19.12 7 55 129 55 Fold axial plane 3H-5, 113-114 23.83 153 19 275 19 Bed 3H-6, 8-9 24.28 282 14 44 14 Bed 3H-6, 117-118 25.37 41 22 163 22 Bed 4H-1, 84-86 27.04 348 23 288 23 Bed 4H-3, 76-77 29.96 337 8 277 8 Bed 4H-5, 117-118 33.37 334 11 274 11 Bed 5H-1, 32-37 36.02 100 27 141 27 Bed 5H-1, 87-89 36.57 180 13 221 13 Bed 5H-1, 109-111 36.79 0 10 41 10 Bed 5H-3, 59-61 39.29 173 24 214 24 Bed 5H-6, 35-40 43.55 150 19 191 19 Bed 6H 45.21 0 0 196 0 Bed 7H 54.71 0 0 147 0 Bed 7H-5, 6-10 60.76 147 Dipping laminae Slump? 7H-5, 60-71 61.3 147 Dipping laminae Slump? 8H-5, 95-100 71.15 160 40 309 40 Bed 8H-5, 135-142 71.55 153 50 302 50 Bed 8H-2, 48-50 66.18 180 16 329 16 Bed 9H-1, 2 73.71 245 Bedding Curviplanar vertical bedding 9H-5, 6 79.71 245 Bedding Moderately inclined curviplanar bedding 10H 83.21 0 0 358 0 Bedding 11H 92.71 96 Only two sections full of white ash 12H-2, 83-84 103.13 293 25 155 25 Bed 12H-3, 38-40 104.18 230 27 92 27 Axial plane Slump? 13H-3, 80-90 114.1 284 68 229 68 Bed Ash layer 13H-5, 122-123 117.52 130 0 75 0 Fold axis 13H-6 117.81 315 15 260 15 Fold axis 13H-4, 100-135 115.8 17 90 322 90 Bed 13H-4, 48-65 115.28 351 60 296 60 Bed 13H-5, 16-20 116.46 154 53 99 53 Bed 14H-1, 125-127 121.05 246 57 129 57 Bed 14H-2, 40-41 121.7 0 90 243 90 Bed 14H-3, 62-63 123.42 0 40 243 40 Bed 14H-4, 60-60 124.9 187 48 70 48 Bed 14H-6, 119-119 128.49 270 12 153 12 Bed 14H-4, 11-15 124.41 203 53 86 53 Fold axial plane 14H-4, 11-15 124.41 357 45 240 45 Fold axis 15H-1, 50-54 129.8 324 41 240 41 Bed 15H-1, 98-105 130.28 334 58 250 58 Bed 15H-5, 116-118 136.46 284 21 200 21 Bed 16H 138.81 0 0 234 0 Bed Curviplanar aspect due to drilling 17H-1, 89-91 149.19 277 71 93 71 Bed 17H-3, 70-77 152 0 42 176 42 Bed 18H-1, 88-90 158.68 94 52 112 52 Bed 18H-2, 40-48 159.7 52 57 70 57 Bed 18H-4, 58-66 162.88 150 60 168 60 Bed 19H-6, 15-22 174.95 337 53 268 53 Bed 20H-1, 84-85 177.64 237 18 247 18 Bed 20H-3, 11-17 179.91 202 50 212 50 Bed 21H-4, 66-68 191.46 148 19 357 19 Bed 22H-1, 116-145 196.96 36 41 235 41 Bed 22H-2, 30-43 197.6 197 66 36 66 Fault Displaces slump-fold closure 22H-3 198.81 199 Bed Wholly disaggregated beds 22H-4, 42-59 200.72 169 63 8 63 Bed 22H-4, 120-133 201.5 16 53 215 53 Bed 22H-5, 97-106 202.77 323 59 162 59 Axial plane Isoclinal fold, two in the section 22H-6, 66-105 203.96 20 47 219 47 23X 205.31 Highly disturbed hemipelagites by XCB coring 23X-2,3,CC 206.81 0 0 0 Evidence of subhorizontal bedding 24X No recovery 25X-5,6,CC 230.61 0 0 0 Bed Subhorizontal bedding 26X 234.31 0 0 0 Bed Subhorizontal bedding when observed 27X 243.91 0 0 0 Bed 28X 253.61 0 0 0 Bed 29X 263.21 0 0 0 Bed 30X 272.81 0 0 0 Bed 31X 282.41 0 0 0 Bed 32X-2, 99-103 294.49 180 5 5 Fissility Biscuit interval 94-104 cm 32X-5, 85-88 298.85 210 71 259 71 Fault 12-mm reverse displacement, biscuit 81-88 cm 33X 301.61 0 0 0 Bed 34X No recovery 35X Poor recovery 36X-CC 330.41 0 0 0 Poor recovery 37X-6, 4-11 347.54 185 71 85 71 Fault 4-mm normal displacement, biscuit 4-11 cm 38X-1, 57-62 350.17 140 65 100 65 Fault Anastomosing fault surface 38X-3, 111-119 353.71 Soft sediment deformation 39X 359.21 Subhorizontal bedding 39X-1, 112-119 360.32 Small folds 39X-1, 92-98 360.12 Small folds 39X-1, 78-83 359.98 Small folds 40X-CC 368.81 Bed 41X 378.41 Bed Horizontal bedding where not convoluted 41X-2, 8-14 379.98 Fold Convoluted lamination 41X-5, 67-76 385.07 40 64 48 64 Fault Two normal faults, 10-mm offset 41X-2, 83-91 380.73 186 90 354 90 Fault Vertical 42X 388.01 Bed Subhorizontal bedding 42X-1, 55-60 388.55 339 83 59 83 Fault, normal 15-mm offset, not a good biscuit 42X-2, 17-24 389.67 346 71 274 71 Fault, normal 7-mm offset 42X-2, 34-40 389.84 153 66 321 66 Fault, normal 5-mm offset 42X-2, 65-70 390.15 79 51 51 Fault Downdip slickenlines on surface 42X-3, 120-123 392.2 Fault 2-mm offset, orientation only apparent (270,72) 43X-1, 36-43 397.96 12 73 47 73 Fault 2 mm wide, no visible displacement 43X-1, 86-102 398.46 151 64 48 64 Fault Downdip slickenlines 43X-2, 36-37 399.46 254 21 149 21 Bed 43X-3, 51-52 401.11 221 19 201 19 Bed 44X-1, 36-41 406.86 204 63 58 63 Web structure In sandy material 44X-1, 36-41 406.86 Bed, deformation bands or drilling feature 45X No recovery 46X Poor recovery 46X Small piece with deformation bands 47X Bed Subhorizontal bedding