Table T7. Structural data, Hole 1174B.
|
Core,
section, interval (cm)
|
Depth (mbsf)
|
Cr az.
(°)
|
Cr dip
(°)
|
Cr
line |
Cr l.plunge
|
Pm
az. |
Pm
dip |
Identifier
|
Notes
|
Comments
|
|---|---|---|---|---|---|---|---|---|---|---|
| 190-1174B | 270 | |||||||||
| 1R | 143.7 | 191 | Highly disturbed mud and sands | |||||||
| 2R | 150.1 | Highly disturbed mud and sands | ||||||||
| 3R | 159.7 | Highly disturbed mud and sands | ||||||||
| 4R | 169.4 | Highly disturbed mud and sands | ||||||||
| 5R | 179.0 | Highly disturbed mud and sands | ||||||||
| 6R-1 | 188.7 | Bed | Horizontal | |||||||
| 6R-2 | 190.2 | Bed | Horizontal | |||||||
| 6R | 188.7 | Planar fissility, anastomosing microlayering | ||||||||
| 6R-1, 122-133 | 190.0 | Slump | Or convolute lamination, 5 mm length | |||||||
| 7R | 198.4 | Highly disturbed mud and sands | ||||||||
| 7R-1 | 198.4 | Biscuit with deformation bands | ||||||||
| 8R | 208.0 | Bed | Horizontal, silty clays and sands with planar fissile intervals | |||||||
| 8R-1, 54-56 | 208.6 | Deformation bands | ||||||||
| 9R | 217.7 | Planar fissility, anastomosing microlayering | ||||||||
| 9R-2, 29-30 | 219.5 | 0 | 4 | 335 | 4 | Bed | (84-101) | |||
| 9R-1, 30-35 | 218.0 | 90 | 60-90 | 60-90 | Deformation bands | 9 bands | ||||
| 9R-1, 50-55 | 218.2 | 270 | 60 | 60 | Deformation bands | 2 bands | ||||
| 9R-1, 68-72 | 218.4 | Deformation bands | 3 bands | |||||||
| 10R-1, 19-23 | 227.4 | 23 | 36 | 36 | Bed | |||||
| 10R-1, 94-101 | 228.2 | 159 | 14 | 14 | Bed | Laminations | ||||
| 10R-1, 94-101 | 228.2 | 341 | 52 | 52 | Deformation bands | |||||
| 10R-1, 94-101 | 228.2 | 345 | 46 | 46 | Deformation bands | |||||
| 10R-1, 94-101 | 228.2 | 330 | 46 | 46 | Deformation bands | |||||
| 10R-1, 42-114 | 228.0 | 90 | 34 | 34 | Deformation bands | |||||
| 10R-2, 56-62 | 229.3 | 341 | 45 | 45 | Deformation bands | |||||
| 10R-2, 59-62 | 229.3 | 207 | 46 | 46 | Deformation bands | |||||
Notes: Cr az. = azimuth of plane in core reference frame, Cr plunge = plunge of plane in core reference frame, Cr line = azimuth of line in core reference frame, Cr l.dip = dip of line in core reference frame, Pm az. = azimuth of plane in paleomagnetic reference frame, Pm dip = dip of plane in paleomagnetic reference frame, paired values in parentheses, in Notes column, record interval of coherent drilling biscuit used in paleomagnetic reorientation. Only a portion of this table appears here. The entire table is available in ASCII format.