Table T22. Power consumption of the NEREID-195 system.

Table T22. Power consumption of the NEREID-195 system.


Subsystem	Condition	Power consumption (W)
CRM		0.70
OBH	T1038 + short cable, mass locked, measured at PDM	3.14
	T1023 + short cable, mass locked, measured at PDM	3.07
	T1038 + 550-m cable, mass unlocked, measured at PDM (prospect)	2.87
	T1023 + 550-m cable, mass unlocked, measured at PDM (prospect)	2.56
DC/DC for OBH	No supply for OBH	0.30
SAM-195	Steady-state	1.00
	Disk writing	11.00
Total average:
MEG + 1 x OBH(T1023) + SAM
	22-hr cycle average for a typical amount of incoming data: (100 sps + 20 sps) x 3 channels x 2 bytes	4.58
MEG + 2 x OBH + SAM
	11-hr cycle average for a typical amount of incoming data: (100 sps + 20 sps) x 6 channels x 2 bytes	7.78

Notes: CRM = combiner/repeater module, OBH = ocean borehole seismometer, SAM = storage acquisition module, MEG = multiple-access expandable gateway, PDM = power distribution module. DC = direct current. Power consumption is shown for a typical supply voltage of 22.4 V.