|
Element
|
Instrument
detection limit (ppb) |
Wavelength
(nm) |
Slit width
(nm)* |
Integration time/calculation
point (s) |
Voltage
(V) |
Mode
|
Increment between points (nm)†
|
Calculation (points)
|
|---|---|---|---|---|---|---|---|---|
| Al | 2.8 | 396.152 | 20/15 | 1.0 | 660 | Gauss | 0.0030 | 5 |
| Ca | 0.2 | 393.366 | 20/15 | 1.0 | 320 | Gauss | 0.0030 | 5 |
| Fe | 6.2 | 259.940 | 20/15 | 4.0 | 670 | Max | 0.0030 | 1 |
| K | 60 | 766.490 | 20/15 | 1.0 | 920 | Gauss | 0.0030 | 5 |
| Mg | 1.6 | 285.213 | 20/15 | 4.0 | 710 | Max | 0.0030 | 1 |
| Mn | 1.4 | 257.610 | 20/15 | 4.0 | 690 | Max | 0.0030 | 1 |
| Na | 69 | 589.592 | 20/15 | 1.0 | 570 | Gauss | 0.0030 | 5 |
| P | 272 | 178.229 | 20/15 | 1.0 | 990 | Max | 0.0030 | 1 |
| Si | 12 | 251.611 | 20/15 | 1.0 | 680 | Gauss | 0.0030 | 5 |
| Ti | 3.8 | 334.941 | 20/15 | 1.0 | 690 | Gauss | 0.0030 | 5 |
| Ba | 1.3 | 455.403 | 20/15 | 4.0 | 580 | Max | 0.0030 | 1 |
| Co | 6 | 238.892 | 20/15 | 1.0 | 650 | Gauss | 0.0030 | 5 |
| Cr | 7 | 267.716 | 20/15 | 4.0 | 740 | Max | 0.0030 | 1 |
| Cu | 5.4 | 324.754 | 20/15 | 1.0 | 650 | Gauss | 0.0030 | 5 |
| Nb | 36 | 316.340 | 20/15 | 1.0 | 670 | Max | 0.0030 | 5 |
| Ni | 15 | 231.604 | 20/15 | 1.0 | 900 | Max | 0.0020 | 1 |
| Sc | 1.5 | 361.384 | 20/15 | 4.0 | 590 | Max | 0.0030 | 1 |
| Sr | 0.4 | 407.771 | 20/15 | 1.0 | 670 | Gauss | 0.0030 | 5 |
| V | 7.5 | 292.402 | 20/15 | 4.0 | 860 | Max | 0.0030 | 1 |
| Y | 3.5 | 371.029 | 20/15 | 4.0 | 620 | Max | 0.0030 | 1 |
| Zn | 1.8 | 213.856 | 20/15 | 1.0 | 930 | Max | 0.0030 | 5 |
| Zr | 71 | 343.823 | 20/15 | 1.0 | 610 | Gauss | 0.0030 | 5 |
Notes: * = widths of the entrance and exit slits. † = interval between each of the calculation points in Gauss mode or the calculation window that constitutes the single point in Max mode. This table is also available in ASCII.