![](../images/close1.gif)
Figure F6. Schematic of the sampling section of the intake probe from Hole 1255A. The two upper views show (A) vertical and (B) horizontal cross sections of the assembled 12-in-long screened section, where all samples are collected, flow rate measurements are made, and compensation fluid is reinjected. The lower view shows horizontal cross sections of the three separated components, (C) the perforated casing with the Carbolite-filled dual wire wraps, (D) the perforated OsmoSampler seat with a single wire wrap, and (E) the OsmoSampler package intake probe.
![](images/02_f06.gif)
![](../images/close1.gif)