Initial Reports, Volume 206
Ms 206IR-102
Chapter 2, Table T13. Analytical conditions for hard rock inductively coupled plasma-atomic emission spectroscopy runs.

Notes: Reported settings are stored in the software. Entrance and exit slits are the same for each element, 20/15 nm, respectively. * = the interval between each of the calculation points in Gaussian mode or the calculation window that constitutes the single point in Max mode. N = number of calculation points.	
 						
Element	Wavelength (nm)	Integration time per calculation point (s)	Voltage (V)	Mode	Increment between points (nm)*	N

Al	396.152	1	570	Gauss	0.003	5
Ba	455.403	4	610	Max	0.003	1
Ca	393.366	1	390	Gauss	0.003	5
Cr	267.716	4	820	Max	0.003	1
Fe	259.94	1	570	Gauss	0.003	7
K	766.49	1	990	Gauss	0.003	5
Mg	285.213	4	640	Max	0.003	1
Mn	257.61	4	560	Max	0.003	1
Na	589.592	1	660	Gauss	0.003	5
Ni	231.604	4	930	Max	0.002	1
P	178.229	4	990	Max	0.003	1
Si	251.611	1	580	Gauss	0.003	5
Sr	407.771	1	700	Gauss	0.003	5
V	292.402	1	890	Gauss	0.003	7
Y	371.029	4	620	Max	0.003	1
Zr	343.823	1	640	Gauss	0.003	5
Ti	334.941	1	620	Gauss	0.003	5
Nb	316.34	1	550	Gauss	0.003	5
Sc	361.384	0.5	620	Gauss	0.002	5