Table T40. Names and physical properties of samples used in the overprint experiment.
Sample
number
Interval
(cm)
Density
(g/cm3)
Mass
(g)
Volume
(cm3)
Susceptibility
(raw values)
Susceptibility
(SI units)
1 73.8 3.0013 1.5454 0.51 191 0.0218
2 73.9 3.0013 2.7497 0.92 338 0.0217
3 74.0 3.0013 3.0073 1.00 371 0.0218
4 74.1 3.0013 3.4547 1.15 429 0.0219
5 74.2 3.0013 0.8952 0.30 113 0.0223
6 74.3 3.0013 3.6018 1.20 441 0.0216
7 74.4 3.0013 3.4309 1.14 410 0.0211
8 74.5 3.0013 3.6223 1.21 449 0.0219
9 74.6 3.0013 3.2097 1.07 401 0.0221
10 74.7 3.0013 3.1708 1.06 403 0.0224
11 74.8 3.0013 3.8145 1.27 485 0.0224
12 74.9 3.0013 3.0606 1.02 364 0.0210
13 75.0 3.0013 3.0760 1.02 375 0.0215
14 75.1 3.0013 3.1708 1.06 462 0.0257
15 75.2 3.0013 3.8522 1.28 483 0.0221
16 75.3 3.0013 3.3497 1.12 426 0.0224
17 75.4 3.0013 2.8503 0.95 337 0.0209
18 75.5 3.0013 2.8578 0.95 344 0.0212
19 75.6 3.0013 3.4854 1.16 434 0.0220
20 75.7 3.0013 3.3709 1.12 429 0.0225
21 75.8 3.0013 1.4400 0.48 180 0.0221
22 75.9 3.0013 2.7889 0.93 332 0.0210
23 76.0 3.0013 3.4100 1.14 398 0.0206
24 76.1 3.0013 2.6244 0.87 315 0.0212
25 76.2 3.0013 1.5006 0.50 186 0.0219

Notes: All samples were cut from a 1-cm-thick whole-round sample taken from interval 206-1256D-26R-4, 74.5-75.5 cm (443.165-443.175 mbsf). The complete table is also available in ASCII.