Date
(Apr 2003)
|
Local time (hr)
|
Operations
|
---|---|---|
10 | 1200 | Hole preparation complete, rig up triple combo (MGT-HNGS-APS-HLDS-DIT-TAP) |
|
1700 | Run into hole with triple combo |
|
1800 | Uplog with triple combo (HNGS-APS-HLDS-DIT) at 900 ft/hr from total depth |
|
1915 | Going down for a second pass |
|
1935 | Repeat with triple combo (HNGS-HLDS-DIT, no APS) |
|
1955 | Going down for an MGT pass |
|
2010 | Uplog with MGT at 600 ft/hr from total depth |
|
2230 | Pull tools out of hole and rigdown |
11 | 0000 | Rig up FMS-sonic (SGT-DSI-GPIT-FMS) |
|
0030 | Run into hole with FMS-sonic |
|
0200 | Short pass with FMS-sonic at 900 ft/hr from total depth |
|
0215 | Going down for a main pass |
|
0220 | Uplog with FMS-sonic at 900 ft/hr from total depth |
|
0315 | Pull tools out of hole and rig down |
|
0500 | Rig up WST-3 |
|
0530 | Run into hole with WST-3 |
|
0700 | Checkshots (7) |
|
0820 | Pull tool out of hole and rig down |
|
0930 | Clear rig floor of logging tools, sheaves, and wireline |
|
1100 | End of logging operation |
Notes: Drillers total depth = 3392.0 mbrf, water depth = 3060 m, end of pipe = 69.0 mbsf, total depth = 321 mbsf. MGT = Multi-Sensor Gamma Ray Tool, HNGS = Hostile Environment Natural Gamma Ray Sonde, APS = Accelerator Porosity Sonde, HLDS = Hostile Environment Litho-Density Sonde, DIT = Dual Induction Tool, TAP = Temperature/Acceleration/Pressure tool, FMS = Formation MicroScanner, SGT = Scintillation Gamma Ray Tool, DSI = Dipole Sonic Imager tool, GPIT = General Purpose Inclinometry Tool, WST-3 = three-component Well Seismic Tool.