|
Item name
|
Janus table
|
Janus column name and calculation
|
| Leg | SECTION | Leg |
| Site | SECTION | Site |
| Hole | SECTION | Hole |
| Core | SECTION | Core |
| Type | SECTION | Core_type |
| Section | SECTION | Section_number |
| Top (cm) | PWS3_SECTION_DATA | PP_Top_Interval x 100 |
| Bottom (cm) | PWS3_SECTION_DATA | PP_Bottom_Interval x 100 |
| Depth (mbsf) | DEPTH_MAP, PWS3_SECTION_DATA | DEPTH_MAP.Map_Interval_Top + PWS_SECTION_DATA.PP_Top_Interval |
| Direction | PWS3_SECTION | Direction |
| Velocity (m/s) | PWS3_SECTION_DATA | PWS3_Velocity |
| Run Number | PWS3_SECTION | Run_Num |
| Run Date/Time | PWS3_SECTION | Run_Date_Time (yyyy-mm-dd hh:mm) |
| Core Temp (C) | PWS3_SECTION_DATA | Core_temperature |
| Raw Data | PWS3_SECTION | Raw_data_collected |
| Measurement No. | PWS3_SECTION_DATA | Measurement_no |
| Separation Mean (mm) | PWS3_SECTION_DATA | Meas_separation_mean |
| Time Mean (µs) | PWS3_SECTION_DATA | Meas_time_mean |
| Calib. Date/Time | PWS3_CALIBRATION | Calibration_Date_Time (yyyy-mm-dd hh:mm) |
| Liner Correction | PWS3_SECTION | Liner_Correction |
| Standard | PHYSICAL_PROPERTIES_STANDARD | Standard_name |
| Standard Set | PHYSICAL_PROPERTIES_STANDARD | Standard_set_name |
| Standard Expected | PHYSICAL_PROPERTIES_STD_DATA | Property_value |
| Contact Pressure (kPa) | PWS3_SECTION_DATA | Contact_pressure |
| Liner thickness (mm) | PWS3_SECTION_DATA | Liner_thickness |
| Calib. Delay M0 | PWS3_CALIBRATION | Delay_m0 |
| Calib. Delay 1/M1 | PWS3_CALIBRATION | Delay_1_over_m1 |
| Calib. Delay Mean Square Error | PWS3_CALIBRATION | Delay_mse |
| Calib. Separation M0 | PWS3_CALIBRATION | Separation_m0 |
| Calib. Separation M1 | PWS3_CALIBRATION | Separation_m1 |
| Calib. Separation Mean Square Error | PWS3_CALIBRATION | Separation_mse |