Table T13. Analytical conditions for hard rock inductively coupled plasma-atomic emission spectroscopy runs.

Table T13. Analytical conditions for hard rock inductively coupled plasma-atomic emission spectroscopy runs.


Element	Wavelength (nm)	Integration time per calculation point (s)	Voltage (V)	Mode	Increment between points (nm)*	N
Al	396.152	1.0	570	Gauss	0.003	5
Ba	455.403	4.0	610	Max	0.003	1
Ca	393.366	1.0	390	Gauss	0.003	5
Cr	267.716	4.0	820	Max	0.003	1
Fe	259.940	1.0	570	Gauss	0.003	7
K	766.490	1.0	990	Gauss	0.003	5
Mg	285.213	4.0	640	Max	0.003	1
Mn	257.610	4.0	560	Max	0.003	1
Na	589.592	1.0	660	Gauss	0.003	5
Ni	231.604	4.0	930	Max	0.002	1
P	178.229	4.0	990	Max	0.003	1
Si	251.611	1.0	580	Gauss	0.003	5
Sr	407.771	1.0	700	Gauss	0.003	5
V	292.402	1.0	890	Gauss	0.003	7
Y	371.029	4.0	620	Max	0.003	1
Zr	343.823	1.0	640	Gauss	0.003	5
Ti	334.941	1.0	620	Gauss	0.003	5
Nb	316.340	1.0	550	Gauss	0.003	5
Sc	361.384	0.5	620	Gauss	0.002	5

Notes: Reported settings are stored in the software. Entrance and exit slits are the same for each element, 20/15 nm, respectively. * = the interval between each of the calculation points in Gaussian mode or the calculation window that constitutes the single point in Max mode. N = number of calculation points. This table is also available in ASCII.